phase 2 with ospf

R3

HUB(config)#router ospf 12

HUB(config-router)#network 1.1.1.1 0.0.0.0 area 0

HUB(config-router)#network 192.168.10.0 0.0.0.255 area 0

HUB(config-router)#exit

HUB(config)#int tunnel 0

HUB(config-if)#ip ospf network broadcast

R2

Spoke-1(config)#router ospf 12

Spoke-1(config-router)#network 2.2.2.2 0.0.0.0 area 0

Spoke-1(config-router)#network 192.168.10.0 0.0.0.255 area 0

Spoke-1(config-router)#exit

Spoke-1(config)#int tun0

Spoke-1(config-if)#ip ospf network broadcast

Spoke-2

Spoke-2(config)#router ospf 12

Spoke-2(config-router)#network 192.168.10.0 0.0.0.255 area 0

Spoke-2(config-router)#network 3.3.3.3 0.0.0.0 area 0

Spoke-2(config-router)#exit

Spoke-2(config)#int tun0

Spoke-2(config-if)#ip ospf network broadcast

Selanjutnya kita lakukan ping pada di setiap router

R3

HUB#ping 2.2.2.2

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 36/46/56 ms

HUB#ping 3.3.3.3

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 32/44/56 ms