Lab 1. Vlan dan Trunks 

SW-1

SW-KIRI#vlan database

% Warning: It is recommended to configure VLAN from config mode,

as VLAN database mode is being deprecated. Please consult user

documentation for configuring VTP/VLAN in config mode.

SW-KIRI(vlan)#vlan 10 name Engineer

VLAN 10 modified:

 Name: Engineer

SW-KIRI(vlan)#exit

APPLY completed.

Exiting....

SW-KIRI#conf t

SW-KIRI(config)#int e0/0

SW-KIRI(config-if)#switchport mode access

SW-KIRI(config-if)#switchport access vlan 10

SW-KIRI(config-if)#exit

IOU-2

SW-KANAN#vlan database

% Warning: It is recommended to configure VLAN from config mode,

 as VLAN database mode is being deprecated. Please consult user

 documentation for configuring VTP/VLAN in config mode.

SW-KANAN(vlan)#vlan 10 name Engineer

VLAN 10 modified:

 Name: Engineer

SW-KANAN(vlan)#exit

APPLY completed.

Exiting....

SW-KANAN#conf t

Enter configuration commands, one per line. End with CNTL/Z.

SW-KANAN(config)#int e0/0

SW-KANAN(config-if)#switchport mode access

SW-KANAN(config-if)#switchport access vlan 10

SW-KANAN(config-if)#exit

Konfigurasi trunkingnya

SW-KIRI

SW-KIRI(config)#int e0/1

SW-KIRI(config-if)#switchport trunk encapsulation dot1q

SW-KIRI(config-if)#switchport mode trunk

SW-KIRI(config-if)#switchport trunk allowed vlan 10

SW-KIRI(config-if)#exit

SW-KANAN

SW-KANAN(config)#int e0/1

SW-KANAN(config-if)#switchport trunk encapsulation dot1q

SW-KANAN(config-if)#switchport mode trunk

SW-KANAN(config-if)#switchport trunk allowed vlan 10

SW-KANAN(config-if)#exit

Kita verifikasi trunking dan vlan

SW-KIRI

SW-KIRI#sh vlan brief

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Et0/2, Et0/3, Et1/0, Et1/1

 Et1/2, Et1/3, Et2/0, Et2/1

 Et2/2, Et2/3, Et3/0, Et3/1

 Et3/2, Et3/3

10 Engineer active Et0/0

1002 fddi-default act/unsup

1003 token-ring-default act/unsup

1004 fddinet-default act/unsup

1005 trnet-default act/unsup

SW-KIRI

SW-KIRI#show interface trunk

Port Mode Encapsulation Status Native vlan

Et0/1 on 802.1q trunking 1

Port Vlans allowed on trunk

Et0/1 10

Port Vlans allowed and active in management domain

Et0/1 10

Port Vlans in spanning tree forwarding state and not pruned

Et0/1 10

SW-KANAN

SW-KANAN#show vlan brief

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Et0/2, Et0/3, Et1/0, Et1/1

 Et1/2, Et1/3, Et2/0, Et2/1

 Et2/2, Et2/3, Et3/0, Et3/1

 Et3/2, Et3/3

10 Engineer active Et0/0

1002 fddi-default act/unsup

1003 token-ring-default act/unsup

1004 fddinet-default act/unsup

1005 trnet-default act/unsup

SW-KANAN#show interface trunk

Port Mode Encapsulation Status Native vlan

Et0/1 on 802.1q trunking 1

Port Vlans allowed on trunk

Et0/1 10

Port Vlans allowed and active in management domain

Et0/1 10

Port Vlans in spanning tree forwarding state and not pruned

Et0/1 10

Kita  ping

PC1

PC1> ip 192.168.10.1/24

Checking for duplicate address...

PC1 : 192.168.10.1 255.255.255.0

PC1> ping 192.168.10.2

host (192.168.10.2) not reachable

PC1> ping 192.168.10.2

84 bytes from 192.168.10.2 icmp_seq=1 ttl=64 time=0.991 ms

84 bytes from 192.168.10.2 icmp_seq=2 ttl=64 time=0.875 ms

84 bytes from 192.168.10.2 icmp_seq=3 ttl=64 time=0.852 ms

84 bytes from 192.168.10.2 icmp_seq=4 ttl=64 time=1.049 ms

84 bytes from 192.168.10.2 icmp_seq=5 ttl=64 time=0.784 ms

PC2

PC2> ip 192.168.10.2/24

Checking for duplicate address...

PC1 : 192.168.10.2 255.255.255.0

PC2> ping 192.168.10.1

84 bytes from 192.168.10.1 icmp_seq=1 ttl=64 time=0.759 ms

84 bytes from 192.168.10.1 icmp_seq=2 ttl=64 time=0.904 ms

84 bytes from 192.168.10.1 icmp_seq=3 ttl=64 time=0.952 ms

84 bytes from 192.168.10.1 icmp_seq=4 ttl=64 time=0.837 ms

84 bytes from 192.168.10.1 icmp_seq=5 ttl=64 time=0.925 ms