Phase 1 with EIGRP

HUB

HUB(config)#int loopback0

HUB(config-if)#ip add 1.1.1.1 255.255.255.255

HUB(config-if)#ex

HUB(config)#interface tunnel0

HUB(config-if)#ip nhrp map multicast dynamic

HUB(config-if)#ex

HUB(config)#router eigrp 12

HUB(config-router)#net 1.1.1.1 0.0.0.0

HUB(config-router)#net 192.168.10.1 0.0.0.0

HUB(config-router)#no auto-summary

HUB(config-router)#int tunnel0

HUB(config-if)#no ip split-horizon eigrp 12

SPOKE 1

Spoke-1(config)#int loopback0

Spoke-1(config-if)#ip add 2.2.2.2 255.255.255.255

Spoke-1(config-if)#ex

Spoke-1(config)#int tunnel0

Spoke-1(config-if)#ip nhrp map multicast 12.12.12.1

Spoke-1(config-if)#ex

Spoke-1(config)#router eigrp 12

Spoke-1(config-router)#net 2.2.2.2 0.0.0.0

Spoke-1(config-router)#net 192.168.10.2 0.0.0.0

Spoke-1(config-router)#no auto-summary

SPOKE 2

Spoke-2(config)#int loopback0

Spoke-2(config-if)#ip add 3.3.3.3 255.255.255.255

Spoke-2(config-if)#ex

Spoke-2(config-if)#int tun0

Spoke-2(config-if)#ip nhrp map multicast 12.12.12.1

Spoke-2(config-if)#ex

Spoke-2(config)#router eigrp 12

Spoke-2(config-router)#net 3.3.3.3 0.0.0.0

Spoke-2(config-router)#net 192.168.10.3 0.0.0.0

Spoke-2(config-router)#no auto-summary

Kita cek ping

HUB

HUB#ping 2.2.2.2 Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 47/65/86 ms

SPOKE 1

Spoke-1#ping 1.1.1.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 40/76/116 ms

SPOKE 2

Spoke-2#ping 1.1.1.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 60/71/80